Get Your Quote for Tankless Water Heater Repair
Fill the form below to inquire about Winnipeg Service Pros's Tankless Water Heater Repair in Winnipeg.
Fill the form below to inquire about Winnipeg Service Pros's Tankless Water Heater Repair in Winnipeg.
We have diagnosed and repaired hundreds of tankless units. These are the failures our clients call about most.
A complete loss of hot water usually points to an ignition failure, a tripped safety sensor, or a gas supply interruption preventing the burner from firing. Attempting to reset the unit without identifying the cause often leads to the same shutdown within hours. We run a full diagnostic to find the exact failure point and repair it properly.
A burner that lights and then cuts off mid-cycle is usually caused by a failing flame sensor, a venting issue triggering a safety shutdown, or a heat exchanger under stress from scale buildup. This fault gets worse over time and can damage components if left unaddressed. We test ignition, combustion, and venting together to isolate the cause.
Error codes that return after every reset indicate the system is detecting an ongoing fault, not a random glitch. The code type points toward the affected system, such as flow, combustion, temperature, or pressure, but the real cause requires component testing to confirm. We pull the full error history and test each suspect component under live conditions.
Leaks can come from a cracked heat exchanger, a failed pressure relief valve, loose connection fittings, or condensate drain issues. Any active leak risks water damage to surrounding areas and can signal a pressure problem that needs immediate attention. We locate the source, assess the damage, and repair or replace the affected component.
Water that never reaches the set temperature is usually caused by a heat exchanger heavily coated in mineral scale, a gas valve delivering insufficient pressure, or a failing burner that cannot reach full output. Running the unit harder to compensate accelerates wear on already stressed components. We diagnose which system is limiting output and repair it directly.
A failed or debris-clogged flow sensor prevents the unit from recognizing water movement and keeps the burner from activating, even when hot water is needed. This often presents as the unit doing nothing when a tap is opened. We clean, test, and replace the flow sensor as needed to restore activation.
A gas valve that is stuck, worn, or delivering incorrect pressure causes intermittent ignition, incomplete combustion, and repeated fault codes. This is a safety-relevant repair that requires a licensed gas technician. We test gas pressure, inspect the valve, and repair or replace it following all safety and code requirements.
A tankless water heater that has gone more than a year without professional service may have heat exchanger scale, inlet filter buildup, and ignition component wear that compound quietly. The risk of a mid-season lockout or error code increases with each season skipped. We assess the full unit condition during a catch-up maintenance visit and address what needs correction.
A tankless water heater consuming more gas than usual without any change in household usage is almost always suffering from scale buildup in the heat exchanger, a miscalibrated burner, or a gas pressure issue forcing the unit to run longer cycles to reach the set temperature. These inefficiencies compound over time and increase operating costs steadily. Maintenance restores proper combustion efficiency and brings gas consumption back in line.
We had another company out before calling Winnipeg Service Pros and they replaced a part that did not solve the problem. Winnipeg Service Pros ran a proper diagnostic, found the actual cause, and had it repaired in the same visit. Should have called them first. Very impressed.
Our unit stopped producing hot water on a Sunday morning. Winnipeg Service Pros was able to get a technician out the same day. He diagnosed a failed flow sensor, replaced it on the spot, and tested the unit before leaving. He also told us what to watch for going forward. Really appreciated the honesty and efficiency.
The technician was professional and the diagnostic was thorough. The part needed for my specific unit had to be ordered, which added a day and a half to the total timeline, but he communicated that upfront so there were no surprises. Once the part arrived, the repair was done quickly and has held up well.
I was impressed by how methodically the technician worked through the diagnostic. He explained what he was checking and why at each step, which helped me understand what had actually gone wrong. The repair was completed cleanly and the unit has worked perfectly since. Excellent service.
A different company told us our tankless unit needed to be fully replaced due to the error codes it was throwing. Winnipeg Service Pros came out, properly diagnosed the issue as a faulty gas valve, and repaired it for a fraction of what a new unit would have cost. Very grateful for the honest second opinion.
The technician arrived within the scheduled window, explained the problem clearly before starting any work, and gave us a firm quote before proceeding. No surprises on the bill. The repair was completed the same day and the unit has been running without issues for months. We will use Winnipeg Service Pros again.
Contact Winnipeg Service Pros today for expert HVAC repair, installation, and maintenance services in Winnipeg area.
Call us directly or send a message using the form, whichever works best for you.
CALL US (431) 441-6595 EMAIL US Click to send a messageContact us! Our conversation stays private.